Technical Specification - weewell WMV850 Mode D'emploi

There are problems with the
Audio.
The Picture is or has become
Choppy
The Picture appears to be
Grainy when using AV out
function to view on a large
screen TV/Monitor

Technical Specification

Operating Frequency Range
Transmitting Power/ERT
Receiving Sensitivity
Type of Spread Spectrum
20 I
WMV850 USER MANUAL
All manuals and user guides at all-guides.com
Ensure that the volume on the TV is ON
Make sure that there is sound within range
of the Camera Microphone
If the unit emits a loud screeching noise
(feedback), move the camera or receiver
farther apart.
The picture may become choppy when
experiencing a lower frame rate (i.e.10
frames per second vs. a higher 20 frames
per second).
Try moving the camera closer to the receiver.
Remove obstructions between the Receiver
and Camera.
The purpose of the AV output is for
convenience only. When using with large
screen TV/Monitor, the picture might be
grainy as the camera limits video resolution
to VGA (640x480 pixels). This is not a product
defect.
For best performance use with TV/Monitor
PIP (Picture in Picture) function. Check your
TV/Monitor product manual to see if this
feature is available on your TV/Monitor.
View video on a smaller screen TV/Monitor
System General
2400MHz—2483.5MHz
9.88dBm Max
-81dBm
FHSS 39 Channels