Machine Settings - Zanussi ZTEB 288 Notice D'utilisation

Laundry: max. weight
Type of use
Ambient temperature
1)
Energy consumption
Annual energy consumption
Energy efficiency class
Power consumption
1) With reference to EN 61121. 8 kg of cotton and a spin speed at 1000 rpm.
2) Energy consumption per year in kWh, based on 160 drying cycles of the standard cotton programme at full
and partial load, and the consumption of the low-power modes. Actual energy consumption per cycle will
depend on how the appliance is used (REGULATION (EU) No 392/2012).

Machine settings

Setting
BUZZER permanent off
Water hardness
Water contains, a variable quan-
tity of limestone and mineral
salts of which quantities vary ac-
cording to geographical loca-
tions thus varying its conductivi-
ty values.
Relevant variations of the con-
ductivity of the water compared
to those prefixed by the factory
could slightly influence the re-
sidual humidity of the laundry at
the end of the cycle. Your dryer
allows you to regulate the sensi-
tivity of the drying sensor based
on conductivity values of the
water.
30
All manuals and user guides at all-guides.com
Min.
Max.
kWh/cycle
2)
Left-on mode
Off-mode
1. Turn the programme selector to any programme.
2. Press simultaneously the Intensief (Intensive) and Lange anti-
kreuk (Long Anti-crease) buttons and hold down for approx. 5 sec-
onds.
3. The buzzer is by default always off.
1. Turn the programme selector to any programme.
2. Press simultaneously the Lange anti-kreuk (Long Anti-crease)
and Start/Pauze (Start/Pause) buttons and hold down for approx.
5 seconds. The current setting is on the display:
–
low conductivity <300 micro S/cm
–
medium conductivity 300-600 micro S/cm
–
high conductivity >600 micro S/cm
3. Press the Start/Pauze (Start/Pause) button sequentially until you
set desired level.
4. To memorize setting press simultaneously the the Lange anti-kreuk
(Long Anti-crease) and Start/Pauze (Start/Pause) buttons or
turn knob to O off position
8 kg
Household
5 °C
35 °C
4,76 kWh
560 kWh
B
0,40 W
0,40 W
Implementation
www.zanussi.com