Breville BES860XL Manuel page 59

TROUBLE SHOOTING GUIDE (continued)
PROBLEM
Grinder does not start when micro
switch is pressed.
'Filter Size' lights are cycling through
single and double.
Too much/too little ground espresso
is being delivered to the filter basket
Too much/too little espresso is being
delivered to the cup
All manuals and user guides at all-guides.com
POSSIBLE CAUSES
Bean Hopper safety interlock is open (hopper
is not correctly in place)
Grind Amount settings are incorrect for
particular grind size
Grind Amount settings and or grind size
require changing
WHAT TO DO
Remove hopper, check for any then debris replace the
hopper into the correct location
Use the Grind Amount adjust dial to increase or decrease
the grind dose.
Reset the machine to defaults or re-program new
espresso Grind Amount settings
59