Breville BES860XL Manuel page 39

PERFECTING YOUR SKILLS - Single Wall Filters (continued)
PRESET SHOT SIZE - DOUBLE SHOT
Press the two cup button once. A preset
extraction of approximately 2oz of espresso will
be delivered. A pumping noise will be heard in
this operation. The machine will automatically
stop once the preset pour has been delivered.
NOTE: Pressing the one cup
buttons during a extraction
will immediately stop the pour.
All manuals and user guides at all-guides.com
PROGRAMMING SINGLE ESPRESSO
Programming over-rides the preset shot sizes
(1oz or 2oz), re-programming the button to pour
your preferred shot size.
1. Prepare to make a single shot of espresso
by following steps 2 to 6 in 'A MINUTE TO
LEARN' on pages 30-32
2. Place your cup underneath the group head.
3. To begin programming, press the
'PROGRAM' button once. The machine will
beep once and the program button will begin
to flash. This indicates the machine is in
programming mode.
4. Press the one cup
machine will commence normal pour
function, and the one cup button surround
will begin to flash.
5. When the desired amount of espresso has
poured into the cup, press the one cup
button to stop the pour. The machine
will beep twice, indicating it has saved
your preferred pour quantity and exited
programming mode.
6. The one cup
saved shot size when pressed, unless
or two cup
reprogrammed, reset to the default settings
(page 40), or overridden by the manual
function (page 40).
PROGRAMMING DOUBLE ESPRESSO
Programming over-rides the preset shot sizes
(1oz or 2oz), re-programming the button to pour
your preferred shot size.
1.
2.
3.
button once. The 4.
5.
button will now pour the 6.
Prepare to make a two cup of espresso
by following steps 2 to 6 in 'A MINUTE TO
LEARN' on pages 30-32
Place your cup underneath the group head.
To begin programming, press the
'PROGRAM' button once. The machine will
beep once and the program button will begin
to flash. This indicates the machine is in
programming mode.
Press the two cup button once.
The machine will commence normal pour
function, and the two cup button surround
will begin to flash.
When the desired amount of espresso has
poured into the cup, press the two cup
button to stop the pour. The machine
will beep twice, indicating it has saved
your preferred pour quantity and exited
programming mode.
The two cup button will now pour
the saved shot size when pressed, unless
reprogrammed, reset to the default settings
(page 40), or overridden by the manual
function (page 40).
39