SOUNDMASTER PL585 Manuel D'instructions page 17

 Repeat play
You can listen the desired tracks or all track or folder repeatedly by this function.
 Random play
You can listen all the tracks or folder in a random order by this function
Tracks programming
Up to 20 tracks can be programmed for MP3 file and play in any order. Before use, be sure the system is at stop
mode before programming:-
1. Set in USB mode & set at stop mode.
2. Press the "MEM / CLK-ADJ " button (3), " MEMORY " will appear on LCD display (8). Moreover, it will indicate
program no. and digits for track no. To be programmed.
3. Select a desired track by pressing "Skip up
4. Press the "MEM / CLK-ADJ " button(3) to store the trace into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6. When all the desired tracks have been programmed, press " Play/Pause " button (10) to play the disc in
assigned order.
7. Press "Stop " button (2) to stop program playback
 After program complete, press "Skip up
 Press " Stop " button (2) at stop mode to cancel all tracks being programmed.
ENCODING FROM PHOTO OR AUX-IN INTO MP3 FILE
The system is able to encode the Phono / Radio or Aux in to MP3 format and recording at memory media with USB
connecting port.
A) Phono/Aux-in encoding
1. Turn "FUNCTION" knob (5) to select " Phono " mode (or Aux-in) and then press the " Record
directly.
2. The LCD display (8) with show the word " REC》 USB" & flashing, now the system is starting the encoding
mode.
3. Start playback at Phono (or Aux-in) for the track which you want to record.
4. To stop the recording, press and the " Record
" Phono " mode.
B) DAB/FM encoding
1. Turn Function (5) to select " DAB/FM " mode and select the desire DAB/FM station.
2. Press the " Record
3. The LCD display (8) with show the word " REC》 USB" & flashing, now the system is starting the encoding
mode.
4. To Stop the recording, press the " Record
Remark:-
- The recording speed is 1:1 and according to the actual plying time.
The system will create a " audio " folder and then store the encoding track in it.
-
- The encoding format is preset at MP3, bit rate : 128 kbps, sampling rate : 44.1kHz.
For Phono/Aux-in encoding, it's possible to change the recording bit rate:
-
- Press " DELETE" button on the remote, the display will show e. g."128 kbps"
- Press "Skip up
- Press " DELETE " button again to confirm.
- No song title will be recorded during encoding mode
C) Track separation (by remote handset)
- You can divide the recording music from phono, tuner or Aux-in to USB track by trace during encoding. Every
time when press the"
USB, the system will generate a new track and continuous the recording. The current text at LCD display will
show 'TS' one time, it mean the unit is creating a new track successfully but track separation feature was not
available at Tuner mode.
or down
" button (14) directly.
" buttons to select the desired recording bit rate 192 or 256 kbps
or down
" (track separation) button once at remote handset during encoding from phono to
" buttons (1).
or down
" button (1) to review the tracks being programmed.
" button (14) until the LCD stop flashing and return to
" button (14) until the LCD (8) stop flashing.
6
PL585 / English Instruction Manual
" button (14)