Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Butler 2505/2510
4.1.2 Set the default speaker volume
1. Enter the menu by pressing
2. Select Handset using the
3. Press OK
4. Select EAR VOL using the
5. Press OK
6. Select the desired volume (1 to 5 ) by means of the
7. Press OK
A double bleep confirms the validation of your choice
Note: The handsfree volume of the Butler 2510 is also adjust together with the receiver in the handset as above
described!
4.2 ADJUSTING THE RING VOLUME
4.2.1 Handset ring
1. Enter the menu by pressing
2. Select Handset using the
3. Press OK
4. Select RING VOL using the
5. Press OK
6. Select the desired volume (OFF or 1 to 5 )
7. Press OK to confirm or
Note: Every programmation is confirmed at the end by a double or single long beep. A double bleep confirms the vali-
dation of your choice
A long bleep signifies that the modification has not been taken into account.
4.2.2 Base ring
1. Enter the menu by pressing
2. Select SETUP using the
3. Press OK
4. Select Base VOL using the
5. Press OK
6. Select the desired volume (OFF or 1 to 5 )
7. Press OK to confirm or
/OK
and
keys
and
keys
/OK
and
keys
and
keys
to return to the previous menu.
/OK
and
keys
and
keys
to return to the previous menu.
74
and
key.
Publicité
Table des Matières
