Parts Supplied - Pioneer AVIC-X1BT Manuel D'installation

• When the ignition switch is turned on (ACC ON), a control signal is output through the
blue/white lead. Connect to an external power amp's system remote control terminal
(max. 300 mA 12 V DC). The control signal is output through the blue/white lead, even
if the front panel is detached, or the audio source is switched off.
• When an external power amp is being used with this system, be sure not to connect the
blue lead to the amp's power terminal. Likewise, do not connect the blue lead to the
power terminal of the auto aerial. Such connection could cause excessive current drain
and malfunction as well as damage to the auto aerial of the vehicle.

Parts supplied

Display unit
Connector
Extension lead
(for speed signal)
System extension connector
Microphone
Hide-away unit
30-pin cable
GPS aerial
Lock tie
Power cord
Power cord
Extension lead
(for reverse signal)
Extension aerial cable
Bluetooth adapter
IP-BUS cable
6