Notice For The Blue/White Lead; Parts Supplied - Pioneer AVIC-F910BT Manuel D'installation

Connecting the System
! Do not connect this lead to the system con-
trol terminal of external power amps.
! Be sure not to use this lead as the power
supply lead for the auto-aerial or aerial
booster. Such connection could cause ex-
cessive current drain and malfunction.

Notice for the blue/white lead

! When the ignition switch is turned on (ACC
ON), a control signal is output through the
blue/white lead. Connect to an external
power amp's system remote control term-
inal (max. 300 mA 12 V DC). The control sig-
nal is output through the blue/white lead,
even if the audio source is switched off.
! Do not connect this lead to the auto-aerial
relay control terminal or the aerial booster
power control terminal.
! Be sure not to use this lead as the power
supply lead for the external power amps.
Such connection could cause excessive
current drain and malfunction.

Parts supplied

Parts marked (*) are not supplied with AVIC-
F710BT.
The navigation unit
Connector*
Power cord
Extension lead
(for reverse signal)
Extension lead*
(for speed signal)
RCA connector
Section
03
GPS aerial
Microphone
7
Engb