Publicité
Les langues disponibles
Les langues disponibles
introduction
Purpose
This Field Service Bulletin explains how to install a customer-supplied machine interface cable for accessing raw arc
voltage instead of using the internal voltage divider board.
Materials and tools
Wire stripper
Wire crimper
#8 (M4) ring and 1/4 in (M6) ring
Blade screwdriver
T15 and T20 TORX screwdrivers
#2 and #3 Phillips screwdrivers
Electric drill with a 19/32 drill bit
18 AWG, 2 wire, non-shielded cable similar to OLFLEX® 190 (OLFLEX 190 part number 601802)
Adjustable wrench
Kit 228711 contents
Part number
008279
Field Service Bulletin
Disconnect electrical power before performing any maintenance. See the
Safety and Compliance Manual included with your system for more safety
precautions.
Description
Strain relief
Machine interFace For raw arc Voltage
warning
electric ShocK can Kill
Quantity
1
1
Publicité
