Chapter 4
This chapter describes what should be checked before installation, how to
set the installation environment, and what should be done during
installation. Then, it describes how to install the camera and connect the
E
cable in actual circumstances.
Before Installation
Checking the contents of the package
Be sure to check if the following items are included in the package.
Camera
User's Manual
C Mount Adapter
12
Installation
Camera Holder(Mount)
Auto Iris
Lens Connector
What should be done during installation and use
Do not disassemble the camera on your own.
Be careful when handling the camera at all times. Do not strike the
camera with your fists or shake it. The camera should be stored and
treated with care to avoid any damage.
Do not put or operate the camera in rain or wet places.
Do not scrub the camera body with rough sandpaper when it is stained.
Please use a dry cloth at all times.
Put the camera in a cool area free from direct light. Otherwise, the
camera may be damaged.
E
13