Hendi 201428 Mode D'emploi page 10

Error codes display
Error codes shown on the digital display (F)
E01
E02
LP
Technical specification
Item no.
Operating voltage and frequency
Rated input power
Protection class
Max vacuum bag width
Pump capacity
Pressure
Width of sealing bar
Dimension
Net weight
EN
Remark: Technical specification is subjected to change without prior notification.
Warranty
Any defect affecting the functionality of the ap-
pliance which becomes apparent within one year
after purchase will be repaired by free repair or re-
placement provided the appliance has been used
and maintained in accordance with the instructions
and has not been abused or misused in any way.
Your statutory rights are not affected. If the appli-
ance is claimed under warranty, state where and
Discarding & Environment
When decommissioning the appliance, the prod-
uct must not be disposed of with other household
waste. Instead, it is your responsibility to dispose to
your waste equipment by handing it over to a des-
ignated collection point. Failure to follow this rule
may be penalized in accordance with applicable
regulations on waste disposal. The separate col-
lection and recycling of your waste equipment at
the time of disposal will help conserve natural re-
10
Possible cause
- The lid (1) is not properly closed.
- Oil pump is defective.
- Machine internal system is defective.
- The lid (1) is not properly closed.
- Machine internal system is defective.
- Machine lost electrical power supply sud-
denly during operation.
201428
1000W
260 mm
-29,9" Hg / -1012 mbar (± 3%) directly at the pump
-29,8" Hg / -1009 mbar (± 3%) in vacuum chamber
330 x 480 x (H) 361 mm
approx. 26,2 kg
when it was purchased and include proof of pur-
chase (e.g. receipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifications with-
out notice.
sources and ensure that it is recycled in a manner
that protects human health and the environment.
For more information about where you can drop off
your waste for recycling, please contact your local
waste collection company. The manufacturers and
importers do not take responsibility for recycling,
treatment and ecological disposal, either directly
or through a public system.
Possible solution
- The lid (1) is not properly closed.
- Contact the supplier.
- Contact the supplier.
- The lid (1) is not properly closed.
- Contact the supplier.
- Check the electrical power supply.
201435
220-240V~ 50Hz
950W
Class I
300 mm
103 L/min
5mm
359 x 425 x (H) 366 mm
approx. 25,2 kg