Intenza Water Filter - Saeco PRIMEA Touch Plus Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INTENZA WATER fILTER

To improve the quality of the water you use, and extend the life of your machine at the same time, it is
recommended that you install the water fi lter. After installation, go to the water fi lter menu to initialize (see
programming).By activating the water fi lter, the machine informs the user when the water fi lter must be
replaced.
remove the water fi lter from its packaging, immerse it vertically (with the opening facing upwards)
in cold water and gently press its sides so as to let the air bubbles out.
1
Remove the small white fi lter
from the tank and store it in a dry
place sheltered from dust.
4
Fill the tank with fresh drinking
water and reinsert it into the
machine.
7
machine
beverage
settings
settings
main
specials
extras
menu
main-
clock
tenance
settings
back to
stand-by
coffee
menu
press "machine settings".
The machine performs the water fi lter activation. Wait until the cycle stops automatically.
At the end of the activation cycle, the machine returns to the product selection menu. Do not use the water
dispensed during this phase.
noTe: If the Intenza water fi lter is not available, insert the small white fi lter previously removed (see
point 1) into the tank.
All manuals and user guides at all-guides.com
2
set the intenza aroma system:
A = Light water
B = Medium water (standard)
C = Hard water
For further details see page 21.
5
Place a container beneath the
hot water spout.
8
cup
water
language
illumination
fi lter
machine
water
display
hardness
settings
alerts &
cup
acoustic
rinsing
warmer
settings
restore
back to
go back
default
menu
settings
Press "water fi lter".
7
3
Insert the fi lter in the empty tank.
the reference mark and the
groove must match. Push fi rmly
until it is completely inserted.
6
program-
show icon
my custom
ming
explanation
coffee
menu
press "programming menu".
9
water fi lter
activation
water
fi lter
not
inserted
inserted
restore
save
back to
go back
default
settings
menu
settings
Press "water fi lter activation".

Publicité

Table des Matières
loading

Table des Matières