Saeco PRIMEA Touch Plus Mode D'emploi page 31

28 prograMMIng The MaChIne
mAINTENANCE
To clean/maintain all of the machine's internal circuits, press the "maintenance" icon on the main
programming menu.
lock the touch screen (to perform
cleaning of the display).
begin washing the milk
circuits.
begin rinsing the milk
circuits.
mILK CIRCUIT RINSE CYCLE
WARNINg! DO NOT OPEN THE SERVICE DOOR DURINg THE bREWINg, DISPENSINg, WASHINg
OR RINSE CYCLE.
to rinse the machine's internal circuits used for preparing milk.
This short cycle must be performed after 20 minutes from the last dispensing of a beverage with milk.
If it is not performed, the machine comes to a halt and does not allow the dispensing of milk beverages.
before performing this function make sure that:
1. a large enough container is positioned under the spout.
2. the milk container has been correctly inserted in the machine.
3. the water tank contains a suffi cient quantity of water.
Press the "milk rinsing cycle" button and then "start rinsing" to start the milk circuit rinse cycle.
milk circuit
start
rinsing
rinsing
cycle
AfTER USE, ALWAYS REmOVE THE mILK CONTAINER AND PUT IT IN THE REfRIgERATOR.
The container may be left in the machine only if it has been washed with drinking water and it does not contain milk;
see page 41.
All manuals and user guides at all-guides.com
In this menu you can:
coffee
lock
cleaning
display
cycle
milk
maintenance
cleaning
cycle
milk circuit
descaling
rinsing
cycle
cycle
back to
go back
menu
rinsing milk circuit-
please wait
rinsing...
Wait for the cycle to fi nish.
The machine will return to the main
menu.
begin the wash cycle of the brew
group.
perform the descaling cycle.
remove the container, rinse and
dry.