Konrow Flipo Guide D'utilisation page 56

Safety and care information
• Read these instructions carefully.
• Keep these instructions.
• Follow all these instructions.
• Heed the warnings.
• Clean only with a soft cloth (dry or slightly damp).
• Do not attempt to disassemble the device; it would no longer be
covered by the warranty.
• Do not bring sharp objects directly into contact with the surface
and do not spray any cleaning product directly onto the screen.
• Do not exert excessive pressure on the screen and do not put
objects on it. This could damage the screen.
• Use the spare parts specified by the manufacturer.
• After any service or repair carried out on this product, ask the
technician to perform a safety check.
• Use only the spare
manufacturer.
• Refer to a qualified person for any repairs. Repair is required if the
device is damaged in some manner or other, if the power cord or
plug is damaged, if liquid has been spilled or objects have fallen on
the device, or if the device has been exposed to rain or moisture,
or has been dropped.
• Do not expose the device to direct sunlight or other source of
extreme heat or cold.
• Respect the privacy of others when using your Mobile.
• Keep the device away from all metal objects (coins, keys, etc.).
• Do not leave near a magnetic field as this could cause data to be
lost or could damage the device.
• Do not drop the device.
All manuals and user guides at all-guides.com
parts/accessories specified by
• Do not expose the device to shocks, friction or impact.
• In order to prevent data loss, remember to make a (computer or
paper) back-up of information saved on the device.
• To prevent interference, do not use the device near other
electronic devices, a pacemaker or medical equipment.
• Operating temperature: 0°C and 40°C.
NOTE: In order to reduce any risk of fire or electric shock :
• Do not expose this device to rain or moisture.
• Do not expose the product to water droplets or to splashes and do
not place any object filled with liquid, such as a vase, on the device.
• Do not use the product near flammable or explosive materials.
• The power plug is used to disconnect the device and must always
be easily accessible.
• In order to completely disconnect the device from the electricity
supply, the power plug must be disconnected from the power outlet.
• Do not attempt to override the safety features of the polarised
plug or the earth connection. A polarised plug has two pins, one of
the
which is wider than the other. A plug with an earth connection has
two flat pins and a third round pin for the earth connection. The
widest pin and the third pin constitute the important safety features
designed to protect you. If you cannot manage to fully insert the plug
into the wall outlet, contact your electrician to replace the obsolete
wall socket.
• Disconnect this device during electrical storms or when not in use
for an extended period.
• Switch off the device in places presenting risk of explosion and
when travelling by plane.
• Do not touch the power cord with wet hands and do not pull on the
charger to disconnect it.
• The power cord must be placed so that it will not be stepped on or
crushed particularly at the outlet, where it is plugged in or where it