Signal Strength; Manual Settings - Imperial DABMAN 14 Mode D'emploi

7 THE DAB+ (DIGITAL RADIO) -FUNCTION

7.2.6 Signal strength

> Repeatedly press the Menu button briefly until the signal
strength is displayed.
E
Stations whose signal strength is below the required minimum signal
strength do not send a sufficient signal.
If necessary, align the telescopic antenna as described
under point 5.2.3.

7.2.7 Manual settings

This menu item serves to check the reception channels and can be used
to align the antenna.
> Press and hold the Menu button, then use the <Tune or Tune>
buttons to select [Set Manually] and then press the Select button.
> Use the <Tune or Tune> and Select buttons to choose
a channel (5A to 13F). Its signal strength is now shown in the
display. If a DAB+ station is received on a channel, the ensemble name
of the station is displayed. The antenna can now be adjusted to maximum
signal strength. Stations whose signal strength is below the required mini-
mum signal strength do not send a sufficient signal. If necessary, align the
telescopic antenna as described in point 5.2.3.
7.2.8 DRC
With the menu item DRC adjustment you can modify the compression
rate, which compensates for dynamic fluctuations and associated volume
variations.
OPERATING MANUAL
Minimum signal strength
Current signal strength
66