Winding The Bobbin; Setting The Spool; Additional Spool Pin; Removing The Bobbin - Janome My Style 100 Livre D'instructions

q
w
r
t
z
x
(A)
(B)
e
q
w
e

Winding the Bobbin

Setting the spool

Place a spool of thread on the spool pin with the
thread coming off the spool as illustrated.
A: Press the large spool holder firmly against the
spool of thread.
q Large spool holder
B: For a small spool, use the small spool holder.
w Small spool holder

Additional spool pin

The additional spool pin is for bobbin winding
without unthreading the machine.
Insert the additional spool pin into the hole.
Place the felt and a spool on the pin.
e Additional spool pin
r Spool pin felt
t Spool pin hole

Removing the bobbin

z Push the hook cover plate release button to
the right and remove the cover plate.
q Hook cover plate release button
w Hook cover plate
x Lift out the bobbin.
e Bobbin
16