Sibelmed DATOSPIR aira Manuel De L'utilisateur page 35

Always transport the device and accessories inside the carrying bag. It provides protection
against small accidental impacts.
DATOSPIR
In case of receiving
and please contact your courier agency, dealer or SIBEL S.A.U. After Sales Service.
DATOSPIR
DO NOT use
DATOSPIR
DO NOT use
ELECTRICAL RISK
DATOSPIR
is NOT intended to be used with other energy sources that are not covered
in this manual.
DO NOT try to open the device. In case of malfunction or unexpected operation, please
contact SIBEL S.A.U.
According to EN60601-1, the equipment is classified as a continuous operation mode, and
due to its intended use, it is considered as applicable part in its entirety.
The acquisition and sending of flow samples to the external software is considered to be an
essential operation in order to comply with the specified accuracy and / or indicate whether
the maneuver is correct.
RISK OF ELECTRICAL SHOCK
DATOSPIR
is designed to be used in conjunction with a software application, such
as W20s Spirometry Software, running on an external device. This device must fulfill the
low voltage Directive (particularly EN 60950-1 standard) and EMC Directive (particularly
EN 55022, EN 61000-3-2, EN 61000-3-3 and EN 55024 standards).
DATOSPIR
DO NOT connect
Temporary immersion of any device part is NOT allowed. MAY CAUSE ELECTRIC DISCHARGE.
Contact of liquids with the internal parts of the device and the connectors must always be
avoided.
511-D00-MUM · Rev 1.02
with a deteriorated packaging, DO NOT use the device
outdoors.
in moving transport vehicles.
After Sales Service or your dealer.
to other devices in order to keep product safety.
DATOSPIR
· User's Manual
EN 7