Panasonic PV-DC152 Mode D'emploi page 58

ª Digital Effect Functions (Camera Mode)
(l 27)
≥If you set [EFFECT1] on [DIGITAL EFFECT] Sub-Menu to
[GAIN-UP], you need to adjust the focus manually.
However, you cannot adjust the shutter speed and iris and
cannot select White Balance.
≥If [EFFECT2] on the [DIGITAL EFFECT] Sub-Menu is set
to [MONO] or [SEPIA], the selected White Balance Mode
cannot be changed.
≥You cannot use Program AE with Gain-up Mode
[GAIN-UP].
≥When [PROGRESSIVE] on the [CAMERA SETUP] Sub-
Menu is set to [ON], it is not possible to use any of the
digital modes in [EFFECT1] on the [DIGITAL EFFECT]
Sub-Menu.
Wipe Mode and Mix Mode (l 27)
If either one of the following operations is carried out, stored
images will be erased, and Wipe and Mix Functions cannot
be used.
≥Use the Camera Search Function
≥Press the [CAMERA STILL] Button
≥Switch the [TAPE/CARD] Selector.
(PV-DC252/PV-DC252-K)
Multi-Picture Mode (l 28)
≥When [PROGRESSIVE] on the [CAMERA SETUP]
Sub-Menu is [ON], Multi-Picture Mode cannot be used.
≥If the [MULTI] Button is pressed while self-recording Mirror
mode (l 20) is used, the still picture is displayed from the
upper right corner of the screen, but, in reality, the picture
is recorded from the upper left corner as usual.
≥The quality of images recorded in Multi Mode deteriorates
slightly.
P-IN-P Mode (l 28)
≥Pictures in P-IN-P Mode cannot be recorded with
Progressive PhotoShot.
≥If the Palmcorder power is turned off, the smaller picture
will disappear.
≥A title cannot be inserted into the smaller picture.
≥If the [CAMERA STILL] Button is pressed in P-IN-P Mode,
the setting is cancelled.
ª Index Search Functions
≥Index Search may not be possible at the beginning of tape.
≥Because PhotoShot Index Signals are not recorded on still
pictures recorded in Continuous PhotoShot Mode, the
PhotoShot Index Function cannot be used for these still
pictures.
≥Scene Index Search may not function properly if the
interval between 2 scene index signals is shorter than
1 minute.
ª Playback Zoom Functions
≥You cannot adjust volume with the Remote Controller in
Playback Zoom Mode.
≥If you turn off the Palmcorder, or if you switch from VCR
Mode to Camera Mode, Playback Zoom Mode is
automatically cancelled.
≥Even if Playback Zoom Functions are being used, images
that are output from the DV Terminal or Digital Still Picture
Terminal are not enlarged.
≥As you enlarge an image, the quality of image suffers.
≥You cannot use the Mirror Mode of Digital Effects and the
Playback Zoom Functions simultaneously.
≥During the Playback Zoom Function, the Variable Speed
Search Function cannot be used with the Remote
Controller.
58
(l 31)
(l 32)
ª Playback Digital Effect Functions
≥Revised signals of images to which digital effects are
added during playback cannot be output from the DV
Terminal or Digital Still Picture Terminal.
≥You cannot use the Wipe Function or Mix Function while
playing back the non-recorded portion of tape.
ª Selecting the Sound during Playback
(l 29, 33)
You can select the sound by using the [AUDIO OUT] on the
[PLAYBACK FUNCTIONS] Sub-Menu.
STEREO: Stereo Sound (main sound and subsound)
L: Left channel sound (main sound)
R: Right channel sound (sub sound)
≥If you dub a tape recorded at the [12bit] selected as the
[AUDIO-REC] setting, playback sound becomes stereo
sound regardless of whether [AUDIO] is set to [MIX] or to
[AUDIO OUT].
ª Audio Dubbing
(l 33)
≥The blank section of a tape cannot be dubbed.
≥Sounds sent through the DV Terminal cannot be dubbed.
≥If a tape has a non-recorded portion when the tape is
dubbed, images and sounds may be disturbed when this
portion of the tape is played back.
≥If you set the tape counter back to 0 at the position where
you want to stop Audio Dubbing so as to make it possible
to use the Memory Stop function (l 63), Audio Dubbing is
terminated automatically when the tape reaches this
position.
≥In the case of importing data recorded with Audio Dubbing
to a Computer using the Computer's software program,
only the original sound (ST1) may be imported, depending
on the software program.
Microphone Jack
When audio dubbing is carried out through an external
microphone or audio equipment, connect it to the [MIC] Jack.
In this case, the built-in microphone of the Palmcorder will be
turned off.
ª Card Functions
(l 34- 41)
(PV-DC252/PV-DC252-K)
≥Do not touch the connector terminal located on the back of
the card.
≥If the Card Slot Cover is open, the card cannot be
accessed.
≥Wide images cannot be recorded on the Memory Card.
≥A card that was formatted with this Palmcorder may not be
usable in other equipment. If this happens, please format
the card with the equipment with which the card is to be
used. Before proceeding with this operation, we suggest
that you take the precautionary measure of storing
important images in your personal computer.
≥In the Card PhotoShot mode, the Palmcorder automatically
saves the file numbers (100-0012, etc.) along with the
pictures. A file number is recorded with each picture as a
running number.
(l 32)