AdjustHandle; SwitchSeat; FoldStroller; Accessories - Nuna MIXX Mode D'emploi

Remove the armbar when the calf support is
in the vertical position and the extra flap is
snapped into place.
FrontSwivelLocks
1 Press the both sides of swivel lock then pull it rearwards to orientate
(27)
the front wheel.
2 It is recommended to use swivel locks on uneven surfaces.
Brake
1 To lock wheels, step on brake lever and push downwards.
2 To release wheels, step the brake lever forwards.
3 Always apply brake when stroller is in stopped position.

AdjustHandle

1 The handle has 3 positions.
2 To adjust the height of the handle, pull the handle upward or downward
(30)-2
while pulling up on the handle adjustment button.

SwitchSeat

The seat can be switched to face front or to face the parent.
1 Squeeze the seat release buttons
Turn the seat to reverse direction, and then insert the seat to seat
(32)
mounts.
17
All manuals and user guides at all-guides.com
(28)
(29)
(30)-1
(31)-1 (31)
while lifting the seat.

FoldStroller

Please fold the canopy before folding the
stroller.
(33)-1
1 Lift up on the folding buttons
(33)-2
fold .
2 The storage latch will automatically hook onto the storage mount, then
the stroller is folded and locked completely.

Accessories

UsewithNunaPIPAInfantCarSeat
When using with the Nuna PIPA infant car seat, please refer to the
following instructions.
1 To attach adapters, place adapters onto mounts as shown. A "click"
sound means the adapter is locked.
2 To attach car seat, place car seat onto adapter as shown.
"click" sound means the car seat is locked.
3 To remove car seat, lift the car seat upwards
(38)-1
the stroller release buttons.
4. To remove adapters, lift the adapters upwards while pulling the release
(39)
buttons.
If you have any problems using the car
seat, please refer to the car seat instruction
manual.
Remove car seat before folding.
and push the stroller forward to
(34)
(35)
(36)
, A
(37)
(38)-2
while pressing
18