PRO-POINT 8344129 Manuel D'utilisateur page 7

8344129
from oil and grease at all times. A properly maintained tool
reduces the risk of binding and is easier to control. Sharp
tools are safer than tools which have become dull because
you do not have to apply excessive amounts of force to
make your cuts. Applying excessive force can lead to slips
and damage to your work or personal injury.
4. Remove adjusting keys and wrenches. Check that keys
and adjusting wrenches are removed from the tool or
machine before connecting it. A wrench or key that is left
attached to a rotating part of the tool increases the risk of
personal injury.
5. Avoid unintentional starts. Be sure that the throttle/ignition
switch is in neutral or OFF position when not in use and
before connecting it to any power/air source. Do not carry
the tool with fingers near or on the switch.
6. Only use the lubricants supplied with the tool or specified by
the manufacturer. Other lubricants may not be suitable and
may damage the tool or even make the tool explode.
7. When not in use for an extended period, apply a thin coat of
lubricant to the steel parts to avoid rust.
8. Maintain label and name plate on the tool. These carry
important information. If unreadable or missing, contact
Princess Auto for a replacement.
Visit www.princessauto.com for more information
All manuals and user guides at all-guides.com
Reciprocating Air Saw V 3.0
7