PRO-POINT 8344129 Manuel D'utilisateur page 16

V 3.0
problem(s)
Tools will not
run.
Air flows
freely from
exhaust.
Tool will not
shut off.
Loss of power
or erratic
performance.
note: Repairs should be carried out by a qualified person
16
All manuals and user guides at all-guides.com
Reciprocating Air Saw
possible
cause(s)
O-rings throttle
valve dislodged
from seat inlet
valve.
O-rings throttle
valve dislodged
from seat inlet
valve.
Excessive drain
on the air line.
Moisture or
restriction in
the air hose.
Incorrect size
or type of hose
connectors.
For technical questions call 1-800-665-8685
Suggested solution(s)
• P our air tool lubricating
oil into air inlet as per
instructions.
• O perate tool in short bursts
of forward and / or reverse
rotation where applicable.
• T ap motor housing gently
with plastic mallet.
• I f tool remains jammed return
to service centre.
• H ave a qualified technician
replace the O-ring.
• C heck the air supply.
• I f tool is not corrected to
a 1/4 in. line, connect it
properly.
8344129