PRO-POINT 8344129 Manuel D'utilisateur page 5

8344129
3. Keep any articles of clothing, jewelry, hair etc. away from
moving parts. These can be caught in moving parts, resulting
in damage to the tool and/or serious injury.
4. Stay alert, watch what you are doing and use your common
sense. Do not operate any machine or tool when you are
tired, under the influence of drugs, alcohol or medications.
5. Use clamps or other practical ways to secure and support
the work piece to a stable platform. Holding the work piece
by hand or against your body is unstable and may lead to
loss of control.
6. Do not allow the spray to strike you and do not spray
toward people or animals. Do not spray the tool itself or any
electrical source.
Specific Safety precaUtionS
1. Never touch the moving parts or the blade during use.
2. Do not start the saw with the blade in contact with any
surface. The sawing action will cause the saw to bounce
violently and could cause injury. Let the tool reach it's full
speed before starting to cut.
3. Check the blade carefully for cracks and damage before use.
If cracked or damaged, replace it immediately.
4. Never attempt to cut with the tool held upside down in a
vise. This will lead to serious injury.
5. Be sure the motor is reaching the full speed before starting
cutting work.
6. It is extremely dangerous to point the cutting surface toward
any person.
7. Do not apply side pressure to the saw blade. Support the
work piece to prevent it from sagging towards the blade
while being cut. There is an increased chance of damage to
the blade when pressure is applied to the sides.
8. The temperature of the machine will increase during the
operation. Keep the working area well aerated to decrease
the temperature.
9. Frequently clean dust from beneath the tool. Pressurized
air is ideal.
Visit www.princessauto.com for more information
All manuals and user guides at all-guides.com
Reciprocating Air Saw V 3.0
5