Programmed Play; Playing Back Music In Mp3 Format; Aux In Socket - AEG MC 4465 BT Mode D'emploi

All manuals and user guides at all-guides.com
Press three times = All the music tracks are played back in
random order. The notification "RAN"
appears on the display. "RANDOM"
appears in the display.
Press four times = All functions are cancelled. The normal
play mode is resumed. "OFF" appears
in the display.
During playback of MP3 music:
Press once = The current track is repeated continuous-
ly. The message " " will flash on the
display. "RPT-1" appears in the display.
Press twice = The selected folder is repeated continu-
ously (
"RPT-ALB" appears in the display.
Press three times = All music titles are repeated continu-
ously. The message " " is lit on the dis-
play. "RPT-ALL" appears in the display.
Press four times = All the music tracks are played back in
random order. The notification "RAN"
appears on the display. "RANDOM"
appears in the display.
Press five times = All the functions are deactivated.
Playback is continued normally. "OFF"
appears in the display.
+10 / –10 buttons (6 on the remote control)
Press one of the buttons to skip forward or backward 10
songs. The requirement is that more than 10 songs are avail-
able.
FOLDER/PRE / FOLDER/PRE buttons (8/18)
During playback of MP3 files:
Press one of the buttons in order to switch to the next or
previous folder. The device will play the music files of the
selected folder.

Programmed Play

This can be used to program any desired sequence of tracks.
(Only in CD-/USB-/CARD mode)
1. Press the ST/MO/ button (20).
2. Press the MEM/CLK-ADJ button (21). "MEM" and
"01 PR" appear in the display and the memory position
"01" is flashing. Use the /TUNE+ / /TUNE– but-
tons (9/17) to select the desired track and then press the
MEM/CLK-ADJ button again. The display changes to
memory slot PR 02.
3. Select the next track with the /TUNE+ / /TUNE– but-
tons and press the MEM/CLK-ADJ button again. Repeat
the procedure until all the desired tracks are selected.
NOTE:
Once the storage capacity of the tracks to be program-
med has been reached "FULL" flashes in the display.
4. Press the
5. Press once the ST/MO/ button to stop the playback
6. To play the programme back again, press the
The device stops automatically after all programmed titles
have been played. The programmed sequence will remain in
the memory until you switch to a different operating mode.
Deleting programmed files
When in stop mode, press the ST/MO/ button again.
"MEM" disappears from the display.
appears in the display).

Playing back Music in MP3 Format

With this device it is possible to play back pieces of music in
MP3 format. The device also supports all standard CD types:
CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machine
detects an MP3 CD automatically (the total number of tracks
and MP3s appears in the display). If you would like to play
one of these CDs, proceed as described under "Playing
CDs/MP3". Tracks can be programmed as described under
"Playing Back Programmed Tracks".
Please note:
There are a number of different recording and compression
methods, as well as quality differences between CDs and self-
recorded CDs.
Furthermore, the music industry does not adhere to fixed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is not
a malfunction of the device.

AUX IN socket

To connect analogue replay devices. Via this socket you can
also hear the sound of other playback devices such as MP3
players, CD players etc. through the loudspeakers.
1. Please connect the external device with a 3.5 mm stereo
2. Repeatedly press the FUNCTION button (4), until "AUX"
3. You will hear the sound playback from the external device
4. For the remaining procedure please see the operating
NOTE:
Adjust the volume of the external device to a comfortable
level.
button (6). The playback starts. The notifica-
tion "MEM" will appear additionally in the display.
while retaining the program.
jack plug to the AUX-IN socket.
is shown in the display.
through the loudspeakers. You may use the VOLUME
control (2) to adjust the volume. The CD buttons are not
functional.
instructions of the external sound source.
English
53
button.