Playing Back Music In Mp3 Format; Programmed Play; Alarm Function - AEG MC 4457 Mode D'emploi

/ (18)
A music search run is started. The symbol "
" " appears in the display. Press the
ton to return to normal playback.
STOP (9/11)
The playback is stopped.
REPEAT (16)
Pressing 1 x = "REP: One" appears in the display for a short
time. The current song is constantly repeated.
Pressing 2 x = "REP: All" appears in the display for a short
time. All songs are constantly repeated.
Pressing 3 x = "REP: Off" appears in the display for a short
time. All functions are stopped. The normal
playback operation is continued.
NOTE:
The activated function may not permanently be shown in
the display due to technical reasons.
SHUFFLE (14)
Pressing 1 x = All titles of the audio CD are played in ran-
dom order. The playback stops after all the
titles were played.
Pressing 2 x = All titles of the audio CD are repeatedly
played in random order.
NOTE:
• This function is only available for audio CD' s (CDDA).
• The activated function may not permanently be shown
in the display due to technical reasons.
Number buttons (2)
To directly select a title, enter the requested title number.
Press the ENTER (19) button to play the title.

Programmed Play

This can be used to program any desired sequence of tracks.
Only for audio CDs (CDDA).
1. Press the STOP button (17/4).
2. Press the PROGRAM button (15). The display shows:
PROGRAM INPUT
01[00] 02[00]
3. Enter the requested order of titles with the number but-
tons. You will be moving the cursor in the display with the
direction buttons / . To display the next two memory
locations, press the direction button .
NOTE:
" respectively
• At least two titles must be programmed to be able
PLAY/PAUSE but-
• Up to 20 titles can be programmed. The same title
4. Repeat the procedure until all the desired tracks are
selected.
5. After you have programmed all the titles, select the
symbol " " with the direction buttons. Press the ENTER
button for confirmation. The playback starts. The symbol
" ", "CDDA", "P", the current title and its elapsed
playing time, as well as the total number of titles will be
shown in the display.
6. When you press the button (17/4) once, playback is
stopped and the current program is erased. The "P"
control lamp goes out.
The device stops automatically once the entire sequence of
programmed tracks is completed. The abbreviation "P" goes
off and the programmed order of tracks is deleted from the
memory.

Playing back Music in MP3 Format

With this device it is possible to play back pieces of music in
MP3 format. The device also supports all standard CD types:
CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machine
detects an MP3 CD automatically (the total number of tracks
and MP3s appears in the display). If you would like to play
one of these CDs, proceed as described under "Playing CDs/
MP3".
Please note:
There are a number of different recording and compression
methods, as well as quality differences between CDs and self-
recorded CDs.
Furthermore, the music industry does not adhere to fixed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is not
a malfunction of the device.

Alarm function

You can set the device in such a way that it switches on at a
specific time.
• To select an option, press the / buttons (6).
• Perform the setting of the digits with the direction but-
tons / . To change to the next digit, press the direction
button .
• Select an option with the ALARM button (4).
to start the playback.
can appear more than once in the list.
English
57