General Information; Ce Designation; Test Symbols; Appliance Description - Stiebel Eltron CK 20 S Utilisation Et Installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

OPERATION

APPLIANCE DESCRIPTION

CAUTION Burns
Parts of the appliance can get very hot and result in
burns. Particular caution is advised when children or
persons in need of protection are present.
2.3

General information

Damage to the appliance and environment
!
- Never cover this appliance.
- Never step on the appliance.
2.4

CE designation

The CE designation shows that the appliance meets all essential
requirements according to the:
- Electromagnetic Compatibility Directive
- Low Voltage Directive
2.5

Test symbols

See type plate on the appliance.
3.
Appliance description
This appliance is wall mounted and is particularly suitable for work
rooms, kitchens, bathrooms, wash rooms and similar.
The external casing of the appliance is made from stove enamelled
sheet steel. The sides are made from plastic. The controls are
located on the r.h. side panel.
The quiet fan draws in the ambient air that is heated by a bare wire
heater element. The air then exits evenly through the hot air chan-
nel and the air outlet grille set into the bottom of the appliance.
The appliance heats up the ambient air inside the room and main-
tains it at the selected temperature.
After mounting the appliance on the wall and making the elec-
trical connection using a mains plug, the appliance is ready for
operation.
WWW.STIEBEL-ELTRON.COM
4.

Operation CK 20 S

1
1 Temperature selector
4.1

Starting heating

The temperature is infinitely adjustable. The appliance switches
off as soon as the selected room temperature has been reached.
f Turn the temperature selector clockwise to the required
setting.
4.2
Control with external room temperature con-
troller
2
In rooms larger than 20 m
you can operate the appliance with a
conventional external room temperature controller.
f To do so, turn the temperature selector fully clockwise.
4.3

Stopping heating / Frost protection

f Turn the temperature selector fully anti-clockwise.
This position ensures frost protection. The heater starts automati-
cally if the room temperature drops below the frost protection
temperature.
4.4

Taking the appliance out of use

f Pull the plug from the power socket.
CK 20, CKZ 20, CKR 20, CKT 20 |
17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ckz 20 sCkr 20 sCkt 20 s

Table des Matières