Spypoint IR-10 Manuel De L'utilisateur page 16

30
Stamp:
Select or cancel imprinting date, time, temperature and moon
phases on photos.
Full moon:
New moon:
First quarter:
Last quarter:
Quality:
Select the photo quality. If the user wishes to record more
images on the memory card this option allows « high »
quality for 10 MP or lower quality such as « normal » 5 MP or
« low » 3 MP.
temperature:
Select the temperature display in °F or °C.
Continuous:
Allow the user to take pictures or videos even if the memory
card is full. The camera will continue to record photos or videos
by deleting the first files.
Power:
Allow the user to select the battery power or the electricity
power.
time Lapse:
Allow the user to set the frequency at which time the camera
takes a picture, without detection. For example, if the option «
5 minutes » is selected in the « Time Lapse » mode, the camera
takes a picture every 5 minutes during that period of operation
(time start and time stop) even if there is no detection.
This option will allow you to obtain pictures of game outside
the detection range of the camera.
Note: The « Time Lapse » mode only applies in « PHOTO »
mode, not in « VIDEO » mode. When « Time Lapse » mode
is selected, the « Delay » mode and the « Multi-shot » mode
are disabled.
All manuals and user guides at all-guides.com
VIEW
View recorded photos or videos on TFT 2.4"
viewing camera screen or on a TV set at home.
View
•Viewing with the 2.4" SCREEN: When camera is set to «
VIEW », the last taken photos or videos recorded appears on
the screen automatically. Press «  » or «  » to view next or
previous images. Press «  » and «  » to zoom in and out.
When the zoom is activated, press « OK » to move the image
by using «  », «  », «  » or «  ». Press « OK » again then
«  » to return to normal view.
Press « OK » to view the different options available in
« VIEW » mode.
Date and time:
Enlarge the imprinted date and time on the picture.
Protect:
Protects your photo and video from the memory card.
Erase one:
Erase from the memory card, the photo or the video seen on the
screen.
Erase all:
Erase from the memory card, all stored photos and videos, with
the exception of protected photos and videos.
Format:
Format memory card and erase all protected photos and videos.
Exit:
Return to viewing screen.
• Watching on tV: You can view the photos or videos directly
from your TV. Connect the yellow end of the cable supplied
into the « VIDEO IN » of the TV and the other end into the
« TV OUT » of the camera. The options are the same as when
viewing on the screen 2.4"(see above).
31