Basic DVD Player Operations
For details about DVD player operations, see pages 29 to
44.
• You can also play back MP3 and JPEG files. See pages 45
to 48.
• When using remote
control, press DVD to
change the remote control
operation mode to the
DVD player operation.
1
Open the Disc Tray
Before turning on the unit, turn on your TV and select the correct
video input (see the manual supplied with your TV).
• When you use a JVC's TV, you can turn on your TV by pressing
STANDBY/ON TV on the remote control and select the
video input by pressing TV/VIDEO. (If your TV is not a JVC's,
see "Operating Other Manufacturers' Equipment" on page 63.)
• For changing the OSD messages—the information on the TV
—into the desired language, see pages 49 and 51.
On the front panel ONLY
Press 0.
The unit is turned on and the disc tray opens.
The STANDBY lamp goes off and the illumination lamp lights up.
• When a disc is already loaded, pressing 3 turns on the unit and
starts playing back the loaded disc.
2
Load a Disc
Place a disc correctly with its label side up.
3
Start Playback
On the front panel
Press 3.
The disc tray closes and the unit starts playing back the loaded disc.
• You can also close the disc tray by pressing 0 on the front panel.
15
DVD AUDIO/VIDEO RECEIVER
CORRECT
INCORRECT
TUNING/GROUP
From the remote control
By pressing the following buttons, you can pause, advance, or reverse
playback, and locate the beginning of the title, chapter, or track.
On the front panel
From the remote control
To stop playback temporarily
Press 8.
• Pressing 3 starts playback again.
To move back the playback position by 10 seconds
(for DVD VIDEO only)
Press 3 during DVD VIDEO playback.
The unit moves the playback position about 10 seconds before the
current position, then resumes playback.
To advance or reverse playback rapidly
Press and hold ¢ or 4.
While you are pressing and holding ¢ (or 4), the unit advances
(or reverses: except for VCD and SVCD) playback 5 times as fast as
the normal speed. When you press and hold ¢ (or 4) further,
the playback speed changes up to 20 times as fast as the normal
speed.
• Releasing the button resumes the normal playback.
To locate the beginning of the chapter or track
Press ¢ or 4.
Press ¢ (or 4) to locate the beginning of the next (current or
previous) chapter or track.
To locate the chapter or track using the number buttons
Press the number buttons (1 – 10, +10) to select the number of the
desired chapter or track.
Ex. : To select 3, press 3.
To select 11, press +10, then 1.
To select 20, press +10, then 10.
From the remote control ONLY
About indication on the display while playing back a disc
While you are playing back a disc, the playback information
appears on the display as follows:
Ex. : When DVD VIDEO is loaded
DIGITAL AUTO
AUTO SURROUND
SPK.
L
C
R
DIGITAL
SUBWFR
LFE
LS
RS
Chapter number
Ex. : When audio CD is loaded
DIGITAL AUTO
PRO LOGIC
SPK.
L
R
SUBWFR
Track number
(
9
/FF
REW/
TUNING/GROUP
FM MODE
STROBE
– TV/DBS CH +
EFFECT
CENTER
1
2
3
TEST
REAR·L
4
5
6
SURR ON/OFF
REAR·R
7
8
9
–
+
SURR MODE
SUBWOOFER
10/0
+10
100+
VOLUME
Elapsed playing time
VOLUME
Elapsed playing time