Maintenance
Fig. 12
Fig. 13
Cleaning Air Turbine Floor Nozzle:
1 Detach the air turbine floor nozzle from the end
of the telescopic tube. Turn it over and using your
thumb and index finger, squeeze the locking tabs
on either side of the turbine cover and lift off.
Remove any debris found inside (Fig. 12).
2 Inspect the rotating brush and carefully remove,
without damaging the bristles, any build-up of hair
or string wrapped around the rotating bristle brush
with scissors (Fig. 13).
8
TOLL FREE: 1-800-798-7398
All manuals and user guides at all-guides.com
Replacing the Dust Bag:
1 Press the On/Off Button to the "Off" position.
2 Remove the flexible hose from the vacuum by
3 Place your fingers underneath the opening
4 Hold the cardboard collar of the dust bag and
5 Holding the cardboard collar, insert a new dust bag
6 Close the top cover of the vacuum.
Fig. 14
Fig. 15
Fig. 16
squeezing the locking tabs on the neck of the hose
and pulling it out. (Fig. 14)
indentation behind the vacuum handle and lift the
top cover up. (Fig. 15)
gently pull the dust bag out. (Fig. 16)
into the slots of the dust bag holder. (Fig. 17)
Make sure that the dust bag is inserted FULLY into
the slots of the dust bag holder.