Alphacool Eiszyklon LT Mode D'emploi page 5

Article text
Up to 450 words
ENGLISH:
The 120mm Alphacool Eiszyklon RGB LT fan is the ideal combination of silence and fan
performance. Due to its high air flow rate and enormous static pressure, the RGB LT
Eiszyklon fan is suitable for use on radiators, CPU air coolers and as a case fan. With a
maximum fan speed of 1300 rpm and a high control range, the Eiszyklon RGB fan is also
suitable for silent systems.
To emphasize this silent effect, the fans are curved in the so-called wave form and have
fine air conduction grooves. This reduces turbulence and self-resonance and focuses the
air flow.
Instead of just 4 LEDs in the corners of the fan frame, as is the case with many fans, Al-
phacool uses 15 RGB LEDs. The entire fan frame serves as a diffuser that distributes
the light evenly over the entire frame. The light is scattered inwards onto the fan blades,
forwards away from the fan and to the side.
ring around the fan compared to the 120mm Alphacool Eiszyklon RGB, which has more
of a laser beam effect.
The Alphacool Eismatrix Controller can be used to create many dynamic effects. Static,
Breathing, Fading, Marquee, Covering Marquee, Alternating, Spectrum Wave, Pulse and
many more effects are possible using this combination. The RGB LEDs can also be
dimmed via the controller.
The Eiszyklon fan is connected via a 3-pin fan connector. The Eismatrix Controller is
required to control the RGB lighting. Alternatively, you can also use other RGB LED
controllers with an appropriate adapter.
Version: 17.08.2018
Wir übernehmen keine Verantwortung für eventuelle Tippfehler. We assume no responsibility for any typing errors. Nous portons aucune garantie sur des
éventuelles erreurs de frappe.
This creates a far more defused looking