General Safety Warnings - EKOM ASPINA - DO M Manuel De L'utilisateur

ASPINA - DO M
IMPORTANT INFORMATION
1.
WARNINGS
1.1. CE Marking
Products marked with CE mark of compliance meet requirements of European Union directives
(93/42/EEC).
1.2. General warnings
 The installation, operation and maintenance manual is an integral part of the appliance. It is
necessary to always keep this document close to the appliance. Strict observance of this manual
is a prerequisite for the correct operation of the appliance.
The safety of operating personnel and failure-free operation of the appliance are ensured only
when using the original components of the appliance. It is possible to use accessories and spare
parts mentioned in the technical documentation or clearly permitted by the manufacturer.
When used with non authorized accessories or consumable material, the manufacturer cannot
assume responsibility for the safe operation and functionality of the device.
 The Guarantee does not cover damages that originate due to the use of non authorized
accessories or consumable material other than those recommended by the manufacturer.
 The manufacturer assumes responsibility regarding safety, reliability and function only if
- The installation, calibration, amendments, extensions and repairs are made by the
manufacturer or his representative or a service organization authorized by the manufacturer,
- The appliance is used in accordance with the installation, operation and maintenance
manual.
 The installation, operation and maintenance manual, at the time of printing, corresponds to the
design of the appliance and its state according to the relevant safety and technical standards.
The manufacturer reserves all copyrights for the given wiring schemes, methods and names.
 This user manual is the original instructions. Translation is performed in accordance with the best
available knowledge.

1.3. General safety warnings

The manufacturer developed and constructed the appliance so that damage would not occur when
the appliance is used for its intended purpose. The manufacturer considers it his obligation to
describe the following safety measures in order to avoid further damages.
 When operating the appliance, it is necessary to observe laws and regional regulations valid in
the place of usage. In order to ensure safe course of works, the operator and user are responsible
for the observation of regulations.
 The original packaging should be kept for the possible return of the unit. Only original packaging
guarantees an optimal protection of the appliance during transportation. If it would be necessary
to return the appliance during warranty period, the manufacturer is not responsible for damages
caused by incorrect packing.
 It is necessary that the user ensures the appliance is safe to use prior to usage.
 The user must familiarize himself with the correct operation of appliance.
 If an undesirable event occurs in the operation of appliance, the user is obliged to immediately
inform his supplier to this event.
 This product is not intended for use in areas with the risk of explosion.
1.4. Safety warnings regarding the protection against electric current
 The appliance must only be connected to an appropriate power source that has correct grounding.
 Prior the connecting the compressor, verify whether the mains voltage and frequency specified
on the equipment are in accordance with the local supply.
 Prior to putting into operation, check for possible damages on the appliance and the air
connectors. Damaged cables and sockets/plugs must be replaced immediately.
All manuals and user guides at all-guides.com
INSTALLATION – OPERATION – MAINTENANCE
- 6 - NP-DO M-37_10-2020