Care And Maintenance - Kärcher VC 4s Cordless Mode D'emploi

Electric floor nozzle
● Attach the soft brush roller floor nozzle (Plus) to
clean all kind of dirt on hard surface.
● Attach the flat brush roller floor nozzle to clean both
carpet and hard surfaces.
Illustration H
One click to clear out dust
1. Press the button on the left to clear out dirt in one
step.
Illustration I
Standard accessories
● Attach the fabric nozzle to clean upholstered furni-
ture, mattresses, laced curtains, etc.
● Attach the crevice nozzle.
Illustration J
Illustration K
This is used for cleaning joints, grooves between
1
doors and windows, tiny slits, etc.
This is used for cleaning delicate objects with care,
2
e.g. bookcases, handicrafts, etc.
Optional accessories
● Attach the mattress nozzle to clean mites / dust in
the mattresses and pillows, etc.
● Attach the dusting brush to clean wall surfaces, cur-
tains, gaps in furniture, etc.
You need to use the flexible hose to connect the
dusting brush and the handy vacuum cleaner.
● Attach the car nozzle to clean dirt / dust in the car,
etc.
You need to use the flexible hose to connect the car
nozzle and the handy vacuum cleaner.
Illustration L
Transportation
The battery has been tested in accordance with the rel-
evant rules for international transport and can be
transported / shipped.
Storage
Note
● Store the appliance in a dry room.
● Consider the weight of the appliance when storing it.
1. Insert the storage holder into the storage base.
Illustration M
Storage holder
1
Storage base
2
2. Insert the appliance into the storage dock.
Illustration N
3. Put the crevice nozzle and the upholster brush into
accessory storage.
14

Care and maintenance

Note
● Use the appliance only when all filters and the dust
container are installed.
● Defective filters and filters that can no longer be
cleaned must be replaced.
Before doing any work on the appliance:
1. Switch off the appliance.
2. Unplug the power supply from the power outlet.
Cleaning the filter set and the dust container
ATTENTION
Incorrect cleaning of the HEPA filter
Damage to the HEPA filter
Do not wash the HEPA filter.
Do not clean the HEPA filter in a washing machine.
Do not dry the HEPA filter with a hair dryer.
The HEPA filter ensures clean exhaust air.
● Clean the HEPA filter if it is visibly dirty.
● Replace the HEPA filter if it is visibly damaged.
● We recommend replacing the HEPA filter every 6
months based on your use of the device.
1. Unlock the dust container, and pull out the dust con-
tainer.
Illustration O
2. Remove the HEPA filter and the cotton filter, and un-
plug the cyclone body and cyclone filter from the
dust container.
Illustration P
3. Clean the cotton filter, and carefully empty / knock
the dirt out of the HEPA filter.
Illustration Q
4. Empty the dust container, and rub down inside using
a cloth.
Illustration R
5. Turn the cyclone body counterclockwise, and sepa-
rate the cyclone body from the cyclone filter.
Illustration S
6. Clean the cyclone body, cyclone filter and dust con-
tainer under running water.
Illustration T
7. Allow the cotton filter, cyclone body, cyclone filter
and dust container to dry completely.
Illustration U
8. Insert the cyclone body into the cyclone filter, and
turn the cyclone body clockwise to latch into place.
9. Insert the cyclone set into the dust container.
10. Install the HEPA filter and the cotton filter on the up-
per section of the cyclone set, and align.
11. Align the mounting point on the appliance with the
desired mounting hole on the dust container, and
latch the dust container into place.
Illustration V
Cleaning / replacing the brush roller
Note
● Replace the brush roller when it is damaged.
● Only dry brush roller is allowed for replacement.
● Do not dry the brush roller using a hair dryer.
English