Kärcher VC 4s Cordless Mode D'emploi page 13

Charger
WARNING
● Only charge the appliance using the original charger
enclosed or with a charger approved by KÄRCHER.
Use the following adapter:
● Appliance type
VC 4s Cordless: 1.198-280.0
VC 4s Cordless Plus: 1.198-282.0
Assembly
1. Insert the extension wand into the vacuum cleaner.
Illustration B
For removal, press the unlock button, and unplug
the extension wand.
2. Insert the extension wand into the floor nozzle.
Illustration C
For removal, press the unlock button, and unplug
the floor nozzle.
Operation
Note
The appliance will be shut down automatically if it is in
danger of overheating. Ensure that the brush roller is
not blocked in any way.
Charging
Note
● The appliance does not work during the charging
process.
● The charging time is approx. 3 - 4 hours.
● The appliance must be fully charged before first use.
1. Open the cover of the charging interface.
Illustration D
2. Insert the connector of the charger into the charging
interface.
3. Connect the power cable of the charger to the power
supply.
The charging process starts automatically.
4. When the charging process is complete, unplug the
power cable of the charger from the power supply.
6.195-094.0
Charger
● Press the ON/OFF button to start vacuuming up the
dust / dirt.
Illustration E
By default, the appliance runs in full speed mode.
● You can adjust the suction power while vacuuming
via the Power Mode button.
Illustration F
3 suction modes are available with full speed, medi-
um speed and energy saving modes.
The table below describes the details of suction
power stages:
Suction Full speed
mode mode indicator
status
Full speed On
mode
Medium Off
speed mode
Energy sav- Off
ing mode
Illustration G
Charging / discharging / battery indicator
1
Floor nozzle indicator
2
Full speed mode indicator
3
The table below describes the meanings of LED indica-
tors on the appliance:
Indicators Status /
Color
Battery 
Flashing
indicator - (green)
charging
Always on
(green)
Battery 
Always on
indicator - (green)
discharging
Always on
(red)
Flashing
(red)
Floor nozzle On
indicator
Off
Full speed On
mode indica-
tor
Off
English
Operation
Description
To capture heavy and
deep-down dirt
To clean up soft or hard
floor at optimized and
moderate speed
Long-lasting feature
designed for the long-
running job
Indicators
Description
Charging
The battery power is full.
The battery power is
above 10%.
The battery power is be-
low 10%.
The HEPA filter, the cotton
filter or the dust container
is clogged.
The brush roller of the
floor nozzle is running.
The brush roller of the
floor nozzle is stopped.
The appliance is running
in full speed mode.
The appliance is running
in energy saving / medium
speed mode.
13