Storing The Appliance - Russell Hobbs 18258 Manuel

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The filter will prevent these particles going into your drink. If you see deposits on
the filter, clean it, otherwise the performance of your kettle will drop, your drinks
may contain scale, and the water inside the kettle may look cloudy.
Cleaning the filter:
The filter is located inside the kettle behind the spout.
With the lid open, gently pull the filter out of its retaining slot.
Lift the filter out of the kettle.
Rinse the filter in warm water and gently remove any scale with a soft brush.
To replace the filter, slide it down into its slot until it clicks into place.
Removing mineral deposits
Decalcification refers to removing the calcium deposits which may form on the
interior metal parts of the kettle.
To get the best performance from your kettle, descale your kettle from time to
time. Frequency depends on the hardness of your tap water and how often you
use the kettle.
We suggest use of a kettle descaler in order to dissolve chalky deposits or scale.
Follow the directions on the descaler package. If a commercial descaler is not
available, fill the kettle with enough white vinegar to cover the bottom by about
1.5cm. Bring the vinegar to a boil. You may need to repeat this several times with
cooled vinegar to remove the calcium build-up completely. When the descaling
process is complete, empty the kettle and rinse out several times with clean
water.

STORING THE APPLIANCE

Unplug the unit from the electrical outlet and clean all the parts as instructed
above. Ensure that all parts are dry before storing.
Store the appliance in its box or in a clean, dry place.
Never store the appliance while it is still wet or dirty.
Never wrap the power cord around the appliance.
10

Publicité

Table des Matières
loading

Table des Matières