Luvion PLATINUM Manuel De L'utilisateur page 27

The system comes with camera(s) that have already been paired. These cam-
eras will communicate with the receiver once powered on. The pairing function
assigns each camera to a different channel on the wireless receiver (up to 4
cameras), and is necessary for configuring additional cameras.
NOTE: It is highly recommended to pair the cameras to the receiver before
permanently mounting the cameras.
1 Power on the camera by connecting the power adaptor or battery pack, and
turning the switch to ON. The power LED for the camera should be ON.
2 Power on the receiver by connecting the power adaptor to the 9V In-
put on the side.
3 Press the MENU button on the receiver. Navigate
to the Pairing menu option by pressing the  keys
to navigate. Press the OK button to open the Pairing menu.
4 Select a channel by pressing the UP and DOWN  arrows.
Press the OK button on the receiver to accept.
5 Press the Pair button located on the bottom of the
receiver using a pen tip or paperclip.
6 A message will be displayed on the receiver screen.The
receiver will count down from 30~0 – you must press
the Pair button on the camera during this time to suc-
cessfully pair the camera. If the button on the camera is
not pressed, the receiver will return to the view screen, and no pairing will take place.
7 Press the Pair button on the back of the camera. Once the camera has
been paired, it will be immediately viewable on the receiver monitor.
platinum user manual ALL .indd 27
All manuals and user guides at all-guides.com
Camera Pairing:
EN
27
4-11-2009 17:17:42