Luvion PLATINUM Manuel De L'utilisateur page 22

Function buttons edge wireless receiver
9 Night Light Button – Press to turn night light ON or OFF (for the camera
currently being displayed on the LCD screen).
10 Alarm +/- Button – Press to increase or decrease the volume of the audio alarm.
11 Receiver antenna – Receives & sends signals from or to the cameras.
12 Antenna Locking Switch – Slide the switch to unlocking position, the
receiver antenna will pop up. Then you can adjust the antenna to
vertical position for better signal reception.
13 Power Slide Switch – Slide the switch to ON or OFF position to switch
EN
on/off the receiver.
14 A/V Out Port (Optional Use) – Connect the included A/V cable to view
video from the receiver on a TV or monitor, or record to a DVD recorder
or VCR. Alternatively, use the A/V out port on the receiver cradle.
15 DC 9V Power Input – Connect the included DC 9V power adaptor to power
the receiver and/or charge the receiver battery (when the receiver is not
in the cradle).
16 A/V Out Port – Connect the included A/V cable to view the receiver picture (when
docked) on a TV or monitor, or record to a DVD recorder or VCR. (NOTE: The A/V
output function will not work if there is no power cable connected to the cradle.
Only one A/V out port should be used at a time).
17 DC 9V Power Input – Connect the DC 9V power adaptor (included) to the
receiver cradle to power the receiver and/or charge the receiver.
NOTE: When the receiver is docked, and the A/V cable is connected (power cable
as needs to be connected), the LCD screen on the receiver will be blacked out.
The LCD screen will turn back on when the A/V cable is disconnected.
22
platinum user manual ALL .indd 22
All manuals and user guides at all-guides.com
4-11-2009 17:17:41