Luvion PLATINUM Manuel De L'utilisateur page 23

Function buttons wireless camera
1 Camera Antenna – Sends & receives signals to or from the receiver.
2 Night Light Switch – Press to turn the night light ON or OFF. Alternatively, press
the light button on the receiver to remotely turn the camera light ON or OFF.
3 Lens/IR LED Cover – Infrared LEDs provide viewing in no/low light conditions.
4 Microphone – Receives sounds for the area near the camera, and trans-
mits sound from the camera to the receiver.
5 DC 9V Power – Connect the DC 9V power adaptor to the camera.
NOTE: The camera can also be powered using 4 AA batteries (not included) in-
stalled in the base. If the camera is plugged in with the AC adaptor, the batteries
will not be used. The batteries are intended for short term, portable camera use.
6 Pair Button – The pair button is located on the back of the camera
behind the stand mount.
7 Sound Alarm Trigger – Adjust the trigger to set the sound alarm sensitivity.
The receiver will beep to alert the user when the sound is above a preset
sound level. Adjust the side wheel to increase or decrease the level.
platinum user manual ALL .indd 23
All manuals and user guides at all-guides.com
EN
23
4-11-2009 17:17:41