Luvion PLATINUM Manuel De L'utilisateur page 26

The Main Menu contains 4 submenus:
1 Pairing - Use the pairing menu to add camera(s) to the receiver.
2 EV - Adjusts the exposure level of the camera.
3 Power saving - Turns on the receiver power save mode (when
no activity on the cameras is detected).
4 Settings - Sets the AV Out options, and resets the receiver to
factory defaults (erases all configurations).
EN
Use the UP  and DOWN  arrows to scroll down the
menu buttons.
EV Menu
The EV Menu is used to adjust the exposure of the camera.
Use the LEFT  and RIGHT  arrows to change the bar from DARK-
EST (left) to LIGHTEST (right). Press the OK button to accept the change.
Power Saving
The Power Saving Menu is used to turn off the screen at a predeter-
mined time, to save battery. This function can be set to 1 minute, 2
minutes, 5 minutes, 10 minutes, or disabled by selecting cancel. The
monitor will go to black screen to save battery after the time you have
set (1minute, 2 minutes, 5 minutes or 10 minutes). It will be acti-
vated by pushing any button on the front panel of monitor or by higher
sound detected by cameras. If it is activated by pushing any button
(except OK button) on front panel of monitor, the monitor will go back
to black screen after the time you set if there is no sound trigger during
that time. If it is activated by higher sound (sound trigger), it will go
back to black screen about 8 seconds after the last trigger.
A/V Out Menu
The A/V Out menu option is used to adjust the resolution
quality of the image sent to the viewing device (such as a TV,
VCR or Monitor). Use the UP and DOWN  arrows to select
a resolution, and press OK to accept. It is strongly recom-
mended to use the "High" setting to ensure the best image
reproduction on large screens – the default setting is "High".
26
platinum user manual ALL .indd 26
All manuals and user guides at all-guides.com
Main menu
4-11-2009 17:17:42