Technical Specifications
Processor
Processor type
Expansion Bus
Bus type
Expansion slots via riser card:
Riser 1 (Center Riser)
Riser 2 (Left Riser)
Memory
Architecture
Memory module sockets
Memory module capacities
Minimum RAM
Maximum RAM
Drives
Hard drives
Diskette Drive
12
Getting Started With Your System
One or two quad- or dual-core Intel
processors
PCI Express Generation 2
(Slot 1) One full-height, half-length x8 link
(Slot 2) One full-height, half-length x8 link
NOTE:
Both slots support up to 25 W, but
only one 25-W card can be installed in the
system at a time. With two cards installed, one
25-W card can be installed while the other card
must be
15 W or under.
800, 1066 or 1333 MHz DDR3 registered or
unbuffered Error Correcting Code (ECC)
DIMMs. Support for Advanced ECC or
memory-optimized operation.
Twelve 240-pin
1 GB or 2 GB UDIMMs;
2 GB, 4 GB, or 8 GB RDIMMs, single-, dual-,
or quad-ranked
1 GB with a single CPU
96 GB (with 8 GB RDIMMs) or
24 GB (with 2 GB UDIMMs)
Up to six 2.5-inch, internal, hot-swappable
SAS or SATA hard drives with backplane
support
Optional external USB 1.44-MB drive
®
®
Xeon