Adjusting The Screen; Emergency Opening; Replacing The Batteries - Arregui FORMA EVOLUTION Mode D'emploi

a long beep and the screen will display the "S-CODE"
message.
• Introduce the current super-user code and confirm via
the enter key. If the code is entered correctly the box
will give off a long confirmation beep and will display the
"NEW CODE" message. If incorrectly entered the screen will
display the "ERROR" message, and the process will have to
be started again.
• Introduce a new super-user code of 3 to 8 digits and
confirm with the enter key. The screen will display the
"AGAIN" message.
• Introduce the super-user code again, and confirm with the
enter key. The box will emit a long acceptance beep and
the screen will display the "S-CODE R" message, to indicate
that it has registered.
4. ADJUSTMENTS TO THE SCREEN AND
SOUND VOLUME

4.1. Adjusting the screen

If it is not desirable for access codes to be seen on screen, then
proceed in the following manner:
• Hit the key
• Introduce code 33
• Hit the enter key
Every time a digit is introduced on screen, it will be represented
by . To de-activate this option, repeat the same procedure.
4.2. Adjustments to the sound volume
This function allows sound volume settings to be configured in
the strong boxes at 4 different levels of intensity. For this you
have to:
• Hit the key
• Introduce code 66
• Hit the enter key
• Introduce the sound volume intensity required, on a scale of
0 to 3. Hit the enter key.
» 0 – there is no sound. The screen will display "SOUNDOFF"
» Sound level 1. The screen will display "SOUND 1"
» Average sound level 2. The screen will display "SOUND 2"
» Maximum sound level 3. The screen will display "SOUND 3"

5. EMERGENCY OPENING

There is an envelope supplied along with these instructions
which contains two user keys (silver-plated) and an emergency
key (gold-colored) and an external feed for 4 AA batteries with
a micro USB connector.
In the event that you don't remember the user or super-user
codes, or if the box is suffering from a malfunction, such as
its batteries discharging, etc., then you can open the box by
A5 instrucciones FORMA EVOLUTION 2020.indd 12
means of the emergency key. To do this, go ahead as follows:
• Insert the (gold-colored) emergency key, which you will find
within the envelope in the lock.
• Make a half-turn to the right (in a clockwise direction)
• Now make a half-turn towards the left (in an anti- clockwise
direction), returning to the initial point of departure, and
then remove the key.
• Insert the (silver-plated) user key and give it two half-turns
to the right, and open the safe.
6. USING THE EXTERNAL BATTERY FEED
To carry out an opening with the external feed, proceed in the
following manner:
• Place 4 x 1,5V (AA) batteries in the external feed.
• Insert the feed connector in the current outlet located on
the lower left of the keypad. The box will emit a long beep,
indicating that it has a feed connection. Do not remove the
feeder until the opening procedure has been completed.
• As soon as "--------"shows on screen, open the box normally.
Should you not have an external AA battery feed to hand that
ARREGUI provides, you can use any external lithium battery
with a micro USB connector.
7. INDICATORS OF THE STATE OF THE BATTERY
Each time the key is tapped to go ahead with using the strong
box, the electronic system checks the state of the batteries. If
the batteries are at a high level, the box will function normally. If
on the other hand the batteries are low, the box will display the
"LO-BAT" message on screen. The box is designed to be able to
carry out several openings even when the batteries are low, but
even so ARREGUI recommends changing the batteries as soon
as the box indicates it is necessary.
If you wish to find out the state of the batteries, you may tap the
enter key with the box switched off; the system will carry
out checks on the condition of the batteries, and will display
the "HI-BAT" sign if the battery levels are normal, and "LO-BAT"
if it is low.

8. REPLACING THE BATTERIES

Open the box in the usual manner and take off the lid of the
battery carrier stored on the inside of the door. Replace the
installed batteries with 4 new alkaline Batteries, of type 1,5V
(AA).
9. MAINTENANCE
Check the condition of the battery compartment on a regular
basis (every 6 months) to identify any possible signs of rust,
sulphation, etc.
Grease/oil any mechanical moving parts, such as locks and
bolts.
En
29/10/20 9:45