How To Clean Interacoustics Products - Interacoustics Diagnostic Audiometer AD629 Instructions D'utilisation

Date: 2012-01-19
Annual Calibration:
The AD629 had been designed to provide many years of reliable service, but annual calibration is
recommended due to possible impact on transducers.
We also required calibrating the AD629; if something drastic happens to a part of it (e.g. headset or
bone conductor is dropped on a hard surface).

How to clean Interacoustics Products

Caution:

Before cleaning always switch off and disconnect from the power supply

Use a soft cloth lightly dampened with cleaning solution to clean all exposed surfaces

Do not allow liquid to come in contact with the metal parts inside the earphones / headphones

Do not autoclave, sterilize or immerse the instrument or accessory in any fluid

Do not use hard or pointed objects to clean any part of the instrument or accessory

Do not let parts that have been in contact with fluids dry before cleaning

Rubber ear-tips or foam ear-tips are single use components

Ensure that isopropyl alcohol does not come into contact with any screens on the instruments

Ensure that isopropyl alcohol does not come into contact with any silicone tubes or rubber
parts
Recommended cleaning and disinfection solutions:

Warm water with mild, nonabrasive cleaning solution (soap)

Normal hospital bactericides

70% isopropyl alcohol only on hard cover surfaces
Procedure

Clean the instrument by wiping outer case with a lint free cloth lightly dampened in cleaning
solution.

Clean cushions and patient hand switch and other parts with a lint free cloth lightly dampened
in cleaning solution.

Make sure not to get moisture in the speaker portion of the earphones and similar parts
AD629 Instruction for Use – English
Page 6/17