Talk Back; Adjust Talk Back Volume; Paging - weewell WMA440 Mode D'emploi

15
when you use the Talk Back feature and when playing a lullaby.

Talk Back

You can use the Talk Back feature to comfort and reassure your
baby.
Whilst using Talk Back you will not be able to hear your baby
until you release the button.
1. Press and hold on the Parent unit to speak to baby.
The display on the Parent unit shows Talk and the green link lights
on both Units flash.
2. Release to hear your baby again.

Adjust Talk Back volume

The Baby unit has 5 volume levels.
1. During Talk Back, press or on the Baby unit to increase or
decrease the volume.
On the Parent unit, the volume can be switched off.
The display shows Volume Off.

Paging

You can use the button on the Baby unit to find the Parent
unit. This will also reset the speaker volume level, in case it has
been switched off.
1. Press on the Baby unit. If the Parent unit volume was set
to off, this will automatically reset the volume to the default
volume. The paging alert will sound.
2. To stop the Page alert, press any button on the Parent unit, or
press again on the Baby unit. If no button is pressed, the
paging tone will stop after 2 minutes.