Fitting Instructions - bort medical AchilloStabil Plus Sport Mode D'emploi

EN
– do not use in case of intolerance of one of the materials used
– no re-use this medical aid is intended for treating one patient
– whilst wearing the support, please neither use any creams nor ointments on or
around it as they can destroy the material.

Fitting instructions

– Slip your foot into the donning aid.
– Grasp the upper edge of the support and pull it over your foot.
– Ensure that the profile insert fully covers the Achilles tendon.
– Correct the positioning of the support if applicable.
– When finished, simply pull the slip-on aid forwards out of the support
For additional relief of the Achilles tendon, one of the heel cushions provided can
be inserted into the shoe on the side of the ailing leg. In order to avoid leg length
differences between the healthy and ailing sides, place the second heel cushion
provided in the shoe on the side of the healthy leg.
Removal
To remove the support, please grasp the lower edge and pull it down over the foot.
Material composition
Polyamide/COOLMAX (PA), polyamide (PA), elastodiene/LYCRA (ED), silicone (SI).
® ®
The sewn in textile label provides the precise material composition.
Cleaning information
Delicate wash 30 °C Do not bleach Do not dry in a tumble dryer
Do not iron Do not clean chemically
Do not use fabric conditioner. Stretch back into shape and dry in the fresh air.
Guarantee
The legal regulations of the country in which you acquired the product apply to the
purchased product. Please contact your specialist retailer if you suspect a warranty
claim. Please clean the product before submitting a warranty claim. If the enclosed
08 08