Fitting Instructions - bort medical StabiloGen Sport Mode D'emploi

EN
– do not use in case of intolerance of one of the materials used
– no re-use – this medical aid is intended for treating one patient
– whilst wearing the support, please neither use any creams nor ointments on or
around it as they can destroy the material

Fitting instructions

Grasp the upper edge of the support and pull it over your foot up to the knee with
the pad facing forwards. The pad should be placed comfortably over the kneecap.
Removal
To remove the support, please grasp the lower edge at the side on the splints and
pull it downwards over the foot.
Material composition
Polyamide (PA), elastane (EL), silicone (SI)
The sewn in textile label provides the precise material composition.
Cleaning information
Delicate wash Do not clean chemically Do not bleach
Do not dry in a tumble dryer Do not iron
Do not use fabric conditioner. Stretch back into shape and dry in the fresh air.
Guarantee
The legal regulations of the country in which you acquired the product apply to the
purchased product. Please contact your specialist retailer if you suspect a warranty
claim. Please clean the product before submitting a warranty claim. If the enclosed
instructions for use have not been properly observed, the warranty may be impaired
or cancelled. The warranty does not cover use of the product inappropriate for
the indication, non-observance of application risks, instructions and unauthorised
modifications to the product.
07