Operation - Meister MBS600-1 Traduction Du Manuel D'utilisation Original

5455650-Bandschlei_man 12.09.14 07:43 Seite 41
hose of the external vacuuming
equipment may be connected with
the help of the adapter sleeve (e), if
necessary.
• If large amounts of dust will be
generated, we recommend this
solution in principle to enable
convenient working.
Cleaning flap (18)
CAUTION! Unplug from the
power source!
The cleaning flap can be opened and
removed to clean the dust duct. When
the dust duct has been cleaned, firmly
attach the cleaning flap again.
Dust collection box (7)
• Connect the dust collection box:
Slide the dust collection box onto the
dust exhaust opening (12), in doing
so insert the two catches (a) into the
opening (b) and allow to engage. The
air outlet openings must face
upwards (Figure 4).
• Remove the dust collection box:
Press the latches (a) and pull the dust
collection box from the dust exhaust
opening (Figure 4).
• Empty and clean the dust collection
box: Hold the dust collection box
horizontally and open as shown (Figure
5). Empty the dust collection bowl (c).
In order to ensure that air can escape
with no restrictions, both parts should
be rinsed in warm soapy water after
you have finished working.
CAUTION! Wood dust is
dangerous! Thus, always work
with the dust collection mechanism
attached.
All manuals and user guides at all-guides.com
Revolution regulation/revolution
preselection
The machine has an electronic function
for controlling the revolutions, thus
activating the switch (1) enables
stepless modification of the revolutions
within the specified values, for example,
to enable a gentle start.
The adjusting wheel for revolution
preselection (15) enables you to make
the appropriate revolution preselection
for the type of material: MIN – 1 to 5 –
MAX.
8 – Operation
The LED operating display (17) lights in
green as soon as the machine is
connected to the power supply. The
machine is ready for operation.
CAUTION! Always switch the
electrical tool on before making
contact with the material
Switching on
Press down the switch (1) and hold
(Figure 8).
Switching off
Release the switch (1).
Switching on continuous operation
Press the switch (1) down, press the
locking button for continuous operation
(2), release the switch (1).
Switching off continuous operation
Press and release switch (1).
41