Seca 656 Mode D'emploi Et Garantie page 79

BMI
Below 18.5
Between 18.5 and
24.9
Between 25 and 30
(incipient obesity)
Over 30
Sending measurement
results to wireless
receivers
Calculating and printing
out BMI automatically
10. To deactivate the BMI function, briefly press the
Enter key (send/print).
Patient is underweight. There could be anorexic tendencies.
Weight should be increased to improve well-being and perfor-
mance. If in doubt, seek the advice of a consultant.
The patient's weight is normal.
The patient is slightly to moderately overweight. He or she
should lose weight if already suffering from a disease such as
diabetes, high blood pressure, gout or disorders of fat metab-
olism.
Weight needs to be lost urgently. The metabolism, the circula-
tory system and the bones are all under strain. A strict diet,
lots of physical activity and behavioral training are all recom-
mended. If in doubt, seek the advice of a consultant.
If the scale is integrated in a
work, you can send the measurement results to
devices ready to receive them (e.g. wireless printer, PC
with USB wireless adapter) at the touch of a button.
Press the Enter key (send/print).
– Press key briefly: send measurement results
to all devices ready to receive them
– Press and hold key: print out measurement
result on wireless printer
If you use this scale together with a wireless printer and
a length measuring rod from the
system, you can have BMI calculated and printed out
automatically.
NOTE
The prerequisite for this function is that the
devices are registered together in one wireless
group (see "The seca 360° wireless network"
on page 86).
1. Perform the height measurement.
2. Briefly press the Enter key (send/print) of the
length measuring rod.
The measured value is sent to the wireless printer
but not printed.
3. Perform the weighing operation.
Rating
seca 360° wireless
seca 360° wireless
Operation • 79
English
net-