Panasonic CF-VEB181 Mode D'emploi page 8

Connecting/Disconnecting
6
Remove the expansion bus connector protective cap and
place it in the cap holder to prevent its getting lost.
7
While holding the latch to the right side,
1
slide the lever all the way back.
2
E
CAUTION
Do not slide the lever without holding the latch to the
right side.
8
Align the expansion bus connector positions of the port
replicator and the computer. Place the computer on top
of the port replicator, and press down firmly.
CAUTION
Do not attempt to make connections if there is any
object between the computer and the port replicator.
Doing so could damage the computer and the port
replicator.
9
Confirm that the lever has moved all the way to the front.
(DOCK POSITION)
8
All manuals and user guides at all-guides.com
(UNDOCK POSITION)
Expansion Bus Connector
Protective Cap
Cap Holder
Latch
Lever
2
1
Lever