Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ATTACHING THE RACING WHEEL
Attaching the racing wheel to a table or a desktop
1. Place the racing wheel on a table or any other horizontal, flat and stable surface.
2. Insert the fastening screw (11) in the attachment system (10), then tighten the device by turning
the screw counterclockwise, so that it feeds into the large threaded hole (9) located beneath the
racing wheel, until the wheel is perfectly stable.
ALWAYS
WARNING: Never tighten the screw alone, without the attachment system in place!
(This could damage the racing wheel.)
8/20
NEVER
Publicité
Table des Matières
