Thrustmaster TMX PRO Manuel De L'utilisateur page 14

AUTOMATIC CALIBRATION OF PEDALS
- Never connect or disconnect the pedal set from the base of the wheel when the wheel is
connected to the console or PC, or during gaming sessions, to avoid calibration problems.
= Always connect the pedal set to the wheel before connecting the wheel to the console or PC.
- Once the wheel has self-calibrated and the game has started, the pedals automatically calibrate
themselves after being pressed a few times.
- Never press on the pedals when the wheel is self-calibrating or when your game is starting up, to
avoid calibration problems.
- If your racing wheel and/or pedal set do not function correctly, or if they seem to be improperly
calibrated: Power off your console or PC and completely disconnect the racing wheel. Then
reconnect all cables (including the power supply cable and the pedal set), and restart your console
or PC and your game.
ATTACHING THE PEDAL SET TO A COCKPIT
- Attach the pedal set using the small screw threads located on the underside of the pedal set.
- Screw two M6 screws (not included) into the cockpit's pedal support plate and into the two small
screw threads located on the underside of the pedal set.
Important: The length of the two M6 screws must not exceed the thickness of the cockpit's pedal
support plate plus an additional 10 mm, to avoid damaging the pedal set's internal components.
Layout diagrams for cockpits are available at https://support.thrustmaster.com: click Racing Wheels /
TMX Force Feedback, then select Manual or FAQ.
IMPORTANT:
13/20