Symbols And Displays; Symbole; Displays - Melitta CAFFEO 65 Mode D'emploi

3 Symbole and displays

3.1 Symbole

Symbol No Meaning
26 On/Off
27 Start/Stop
25 1 or 2 cups
25 Steam
25 Decalcifying
25 Cleaning
F
25 Function
2 Bean container
2 Whole coffee beans
Ground coffee
2
Steam/hot
15
water outlet
3 Symbole and displays

3.2 Displays

Symbol No Meaning Display
20 Temperature Flashes
20 Temperature Lights up
23 Brewing strength Lights up
23 Brewing strength Flashes
19
All manuals and user guides at all-guides.com
Explanation
Switching machine on/off.
Starts and stops the selected
function and confirms all inputs.
Making 1 or 2 cups.
Steam operation.
Automatic decalcifying programme.
Automatic cleaning programme.
Indication and setting of water
hardness and Auto-Shut-Off time.
Remove bean container. Set the bean
selector switch to midposition beforehand.
Use whole beans for brewing.
The grinder is activated.
Brewing with ground coffee; do not put
in more than 2 level scoops of coffee.
Steam (under steam operation) or hot water
(under normal operation) emerges from the
milk frother.
Explanation
Operating temperature not yet reached.
Appliance is ready for use.
Indicates the brewing strength set, adjus-
table with brewing strength regulator.
Bean container is set to nondefined or
extraction position when drawing beans.
3 Symbole and displays
3.2 Displays
Symbol No Meaning Display
23 Brewing strength Off
Cup filling
Lights up
24
volume
Cup filling
Flashes
24
volume
22 Water reservoir Lights up
22 Water reservoir Flashes
Coffee grounds
Lights up
21
container
Coffee grounds
Flashes
21
container
19 Decalcifying Lights up
19 Decalcifying Flashes
18 Cleaning Lights up
18 Cleaning Flashes
Cleaning,
Flashes
18, 19
Decalcifying
Automatic shut
down
Explanation
Bean container is set to ground
coffee or extraction position.
Indicates the cup filling volume, use
the water quantity regulator to adjust.
Brewing unit is overfilled:
Remove the brewing unit, as described
on P. 27. With an overfilled brewing
unit, the device cannot be switched off
manually. In this case, you can directly
open the service door (7). Remove the
coffee powder and clean the brewing
unit under running water.
Then, clean the inside of the device
with a damp cloth. Reinsert the brewing
unit. After this, the device is ready to
operate.
Water reservoir empty. Fill with water and
replace. Continue operation by pressing the
start key. It can happen that air is trapped
between the pump and the water reservoir.
In this case, confirm repeatedly via the start
key until the new water supply is drawn.
Knob for steam/hot water
outlet is set to open.
Coffee grounds container full. Take care
when emptying that the service door is
closed and the machine switched on.
Wait about 5 seconds before replacing
the grounds container.
Coffee grounds container not fitted
or not properly inserted.
Appliance must be decalcified.
Decalcifying programme running.
Appliance needs cleaning.
Cleaning programme running.
The service door is open or the
brewing unit is not fitted.
The service door was opened or
Auto-Shut-Off function is activated.
20