EUROM GOLDEN 2000 AMBER SMART Mode D'emploi page 21

 Press the on/off switch (5) on the side of the unit to
"I" (on); The blue light on the reception point will go
on.
 Set the device into operation by pressing the ON
button of the remote control. The device has a
slo sta t at % output. 4 seconds after starting,
it automatically switches to the most recently used
output. On first use, it will switch to 100% output
after 4 seconds.
 With the Ʌ-arrow, you can switch to a higher
heating level
 With the V-arrow, you can switch to a lower heating
level
 Pressing on the MAX button takes you straight to the highest heating level.
 To stop the unit, first press the 'off' button on the remote control. Then turn it off by
pressing the on/off-switch (5) to O off . Fi all , u plug it f o the all outlet. Allo
the heater to cool down.
Warning!
 When you turn off the unit using only the remote control (or the app), the 'standby'
remains. So turn it off using the remote control (c.q. the app) or the on/off-switch and
remove the plug from the socket!
 Remove the batteries out of the season, that will extend the life of the remote
control.
 When you use the appliance for the first time (or after a long time again), observe it
during the first 10 till 15 minutes to be sure that is works trouble-free.
The reset button
You can use the reset button in three situations (see below):
- To operate the device without the remote control. Every time that you press the reset
button (briefly), the output changes from: > 2000 W > 1320 W > 660 W > off.
- To switch the device back on without the remote control, after the shock safeguard
has turned it off (see: Shock safeguard).
- To set or change the password for the app control.
App control
The EUROM GOLDEN 2000 AMBER SMART can also be
controlled by an app that has been downloaded to a
tablet or smart-phone (via a blue tooth connection).
This app is available in the app store for Apple devices
from September 2014 and can be found under EUROM
heating. It is available for Android in the Google Play
Store.
If you have switched the device on with the app and
then continue to control it with the remote control or
manual controls, the bluetooth connection will be
broken. If you then wish to reuse the app controls, you
All manuals and user guides at all-guides.com
21